How to Make a satin-lined shower cap. I redeemed myself, DIY shower cap success

Handcrafted pink DIY shower cap, showcasing its smooth, waterproof material and elasticated edge for a snug fit.

My first shower cap came apart after one week of use. Check out the blog post “Shower Cap Fail" to learn more. Once I took the shower cap completely apart, I began thinking of other designs and ways to make the second shower cap last longer. I knew I needed to make this cap waterproof and the vinyl fuse was not an option for me this time. Then I remembered the shower liner I bought, which was extremely lightweight and durable. I thought the liner would perfectly cover the cotton fabric of the shower cap and feel comfortable on my head, so I incorporated it into the design. I did not want to use an elastic band since I preferred a cap with a ribbon, but the ribbon design did not work previously. So, I decided to buy an elastic band and make the best of it.

My thoughts

This was a long journey, but I finally made a durable shower cap that I still use a year later. The shower liner is a little uncomfortable when it rubs against my forehead, but I enjoyed wearing this shower cap. Also, I love satin fabric since it keeps my hair soft and protected. After a year of use, I noticed a little mold has developed where the shower liner is sewn around the back of the cap. I know that is super gross. I guess some water got into the holes in the shower liner. So, now it is time for a new shower cap. This time I will not be making the shower cap. This second DIY shower cap was worth it since it lasted a year, however, I am not interested in going through that process again. I will buy a shower cap from the hair store this time J. I hope you enjoyed this journey and if you are interested in making this DIY project, check out the instructions below.

Materials

Joann

Casa Collection Satin Fabric

Shades of Pink Blender Cotton Fabric

Walmart

Clear lightweight shower liner

Elastic band

Rotary scissors

Cutting mat

Amazon

Singer sewing machine

Process

Step 1

I insert sewing pins along the edge of the fabric.

Step 2

I laid out the shower liner and placed the disassembled shower cap, cotton and satin fabric, on top. The shiny side of the satin fabric was facing down on top of the more pigmented side of the cotton fabric. So, the matte side of the satin fabric is facing up as shown in the picture.

Step 3

Next, I cut around the fabric leaving a one-inch seam allowance.

Step 4

I measured my head with the elastic band by placing it around my head. I took the elastic band and placed it around my head. The band was not too tight or loose around my head.

Step 5

Next, I secured both ends of the band with my fingers where I desired to cut it and removed the band from my head. I decided to cut one inch away from my measurement. That extra one inch will help secure the shower cap once the elastic band has been inserted.

Step 5

With my sewing machine, I sewed along the edge of the fabrics and shower liner leaving about a one-inch opening.

Step 6

I flipped the fabrics inside out through the one-inch opening.

Step 7

Now the shiny side of the satin material and the shower liner are facing outward. I smoothed out the liner with my hand to remove any wrinkles.

Step 8

Next, I sewed one inch away from the edge of the fabric to create an opening to insert the elastic band. I sewed it completely around this time.

Step 9

Next, I grabbed my elastic band and attached a paper clip to one end. I began pushing the elastic band through the opening I just created. Once I looped the elastic band through the entire shower cap, I connected the paper clip to the other end of the elastic band.

Step 10

Then I stretched out the shower cap since it was pulled tight together from the elastic band.

Step 11

Once I got the shower cap stretched out, I removed the paper, overlapped the ends of the band, and sewed down the extra one inch of the elastic band from step 2.

Step 12

I closed the one-inch opening of the fabric by hand stitching it. And voila! My new and improved shower cap was complete.